NYLON 6 30% GF CAST
Nylon 6 30% glass filled (GF) cast is a thermoplastic material that is made from nylon and glass fibers. It offers increased strength, wear, stiffness, creep resistance, and dimensional stability from standard nylon. This material is often used in prototype and development work where injection molded parts would be cost prohibitive.
| Mechanical Properties | |
|---|---|
| Tensile Stength | |
| Tensile Elongation | |
| Tensile Modulus | |
| Izod Impact Strength | 1.8 |
| Flexural Strength | |
| Flexural Modulus | |
| Compressive Strength | 15,300 |
| Compressive Modulus | 336,000 |
| Dynamic Coefficient of Friction |
| Thermal Properties | |
|---|---|
| Heat Deflection Temperature at 66 PSI | |
| Heat Deflection Temperature at 264 PSI | |
| Maximum Serving Temperature for Short Term | |
| Maximum Serving Temperature for Long Term | 275 |
| Thermal Conductivity | |
| Coefficient of Linear Thermal Expansion | 5.5 x 10^5 |
| Flammability Rating |
| Electric/Physical Properties | |
|---|---|
| Volume Resistivity | |
| Surface Resistivity | |
| Dielectric Strength | |
| Specific Gravity | 1.17 |
| Toughness | |
| Rockwell Hardness Shore D | 79 |
| Water Absorption | 1.1 |
